Bird Breezer website header

The Bird Breezer is a new innovation designed to prevent birds from landing at unwanted areas.

The unit is designed to rotate in the slightest of breezes, ensuring maximum protection time.

Besides the motion, we also incorporated the "danger" colour spectrums into the units, but without the severe strobing effect -
making it ideal when there are neighbours involved who may be irritated by flashes.
 

Simply install the Bird Breezer unit at the area where approaching birds tend to land.
The highly visible rotating cups will discourage most birds from landing nearby the unit.

The Bird Breezer is most effective when installed in direct sunlight and requires
only a slight breeze to rotate.

Ideal for rooftops, chimneys, parapets, pergolas, louvers as well as reducing bird related
crop damage in the agriculture.

The Bird Breezer unit can either be glued to the surface with a strong adhesive or fastened with
four screws (adhesive and screws not included).

The Bird Breezer unit and mounting bracket are made out of ABS plastic.
The four metalized ABS cups rotate on a durable double-bearing assembly to ensure optimal
sensitivity, balance and longevity.

The Bird Breezer unit should be cleaned every four months to ensure optimal reflectivity.
- Spray the cups with a window cleaning soap and wipe them clean with a soft cloth.
- Rinse the cups with water and dry using a clean cloth.

KGB logo

Kuwaiti German Group
 
Kuwait City.Sharq, Jaber al Mubark St. Sansbil Tower , M 1. Office 31
 
Tel: +96522444200, +96598003050
 
E-mail:  , 
 

 

Urban birds are on the increase with aided by the abundance of food, roosting options, and the dwindling natural predators. This population explosion has caused some birds to become pests by their sheer numbers. Look at Geese for example or Haddidas, not your typical pest species, but due to their numbers, they can be considered a pest by some.

As these pest species increase in numbers, they inevitably must spread out to find suitable roosting areas for the next generation. Feral pigeons can live up to 4 years and in their lifespan can lay up to 32 eggs. These eggs will hatch in 18 days, the young will be out of the nest in 35 days and looking for a mate as early as 7 months. The cycle perpetuates and the species rapidly increases.

The average Feral pigeon is not too fussy when it comes to picking a roosting spot. All it needs is food, water and somewhere relatively safe to sit. This makes office buildings and industrial areas ideal for a young feral pigeon couple looking to settle down and start a family. As these birds do not migrate and prefer to stay near their birthplace, they can be troublesome to remove. Once you have a pigeon problem, things are not going to get better by themselves, you will need to look at your pest control options.

What sort of damage can you expect from feral pigeons?

Outside the building

Pigeons will foul the areas below their roosting areas. Their tactic is to back-up over the edge and release a stream of droppings on anyone and anything that is unlucky enough to get caught below.

For business premises, this causes and unpleasant scene for visitors and can damage cars parked below and create an injury and health hazard.

For industrial areas and warehousing, the pigeon droppings can damage goods, raw materials, food packaging, etc. resulting in financial loss.

Birds roosting outside in the gutters will disrupt the buildings’ drainage causing water to build up, allowing insects to breed and increasing the risk of water damage to timbers, metal fittings, and wall cladding.

People outside the building may experience aggressive bird behaviour when they come too close to any nests containing chicks or while eating their food. Gulls and starlings are particularly aggressive when it comes to stealing food from people.

Meanwhile…Inside the building

While pigeons are not too fussy where they roost, they will prefer to be somewhere warmer than hugging the ledge or external piping. They will gain access to the building if they can and that is where your trouble really begins.

Property damage

Feral pigeons have the time and tenacity to wear down the defenses of your building. They will dislodge roof tiles, make holes in roof spaces and exploit any weaknesses in the building's structure.

Once inside their droppings will build-up, along with the additional pests (mites), bacteria and diseases that accompany the feral birds.

Birds are not tidy house guests and will quickly make a mess of the insulation in the roof spaces along with any air conditioning installations, lift motor machinery and anything else stored there that they can sit on, poop on or peck.

For food manufacturing and food warehousing, the pest birds will inevitably gain access to the storage areas and spoil the food and packaging.

Risk of Disease

Feral pigeons are host to multiple types of bacteria, diseases, pathogens, and viruses (E. coli, Salmonella, Histoplasma). Their general living habitat is a petri dish for all manner of nasties that can get into the building air supply, contaminate the water supply and food, causing sickness and disease.

Pests attract pests

A pest bird infestation attracts other pests – fleas, ticks, mites, lice. This, in turn, creates its own new ecosystem where larger insects come to eat the bugs. The insects and birds attract the rodents and reptiles and soon your ‘unused roof area’ is teaming with life.

If you would like your building to be more like a place of business and a lot less like a bio-hazard wasteland, then get in touch and we will be happy send the pest birds packing!

Pelsis

Network Bird Control by Pelsis

E-mail:

Tel: +44 (0)800 988 5359

BWT square 2

Eagle Eye Bird Wire Track is an easy, effective and aesthetically pleasing product to use, especially when multiple rows of bird wire are needed to protect ledges, parapets, beams, piping, etc. from perching birds.
Eagle Eye Bird Wire Track drastically reduces installation time as it requires less drilling into the installation surface than traditional bird wire posts.

This unit is designed for installation on flat, as well as slightly curved surfaces.

It is UV-stabilized and made from ABS plastic.

 

Dimensions

Additional parts needed for the installation:

Additional parts


Installation:
1) Cut the Bird Wire Track to the desired width.
2) Fasten the Track to the surface with screws. An adhesive may be added for extra installation durability.
3) Bird Wire Track should be spaced approx. 1.5m apart.
4) Simply clip a tension spring onto the top of the first row.
5) Fasten the wire to the spring by means of a copper ferrule.
6) Thread the wire through the opening of the second row and fasten it to the 3rd row using a copper ferrule.
7) Add a spring to the third row and repeat the process until the whole area is covered.

Attachments

Bird Wire Track installed Photo

Cape Clean Pvt Ltd
146/8 Doddaberappa Layout
Kanakagiri
Horomavu Post
Bangalore 
560043
 

Bird barrier logo

  • BIRD BARRIER AMERICA, INC.
    20925 Chico Street
    Carson, CA 90746, USA
    T: 310-527-8000
    F: 310-527-8005
     
Ensystex logo2014 light blue
 
Unit 3 / 4 - 6 Junction Street 
Auburn 
New South Wales 
2144 
Australia 
+61 2 9364 1800

pestITlogoa

PO Box 530 
Bangalow 
North South Wales 
2479 
Australia
1300 66 56 57
 
 

Eagle Eye Bird Wire Track is an easy, effective and aesthetically pleasing product to use, especially when multiple rows of bird wire are needed to protect ledges, parapets, beams, piping, etc. from perching birds.
Eagle Eye Bird Wire Track drastically reduces installation time as it requires less drilling into the installation surface than traditional bird wire posts.

This unit is designed for installation on flat, as well as slightly curved surfaces.

It is UV-stabilized and made from ABS plastic.
Bird Wire Track  Attachments

 

Dimensions

 

Installation:
1) Cut the Bird Wire Track to the desired width.
2) Fasten the Track to the surface with screws. An adhesive may be added for extra installation durability.
3) Bird Wire Track should be spaced approx. 1.5m apart.
4) Simply clip a tension spring onto the top of the first row.
5) Fasten the wire to the spring by means of a copper ferrule.
6) Thread the wire through the opening of the second row and fasten it to the 3rd row using a copper ferrule.
7) Add a spring to the third row and repeat the process until the whole area is covered.

Parts needed:

Bird Wire Track installed Photo

Page 1 of 13